A Punching Machine J23-6.3T Hand Punch Press

(مراجعة واحدة)

الوزن 500 كيلوجرام
الأبعاد 1200 × 1200 × 1200 ميليميتر
مصدر الطاقة

كهربائي

قوة اللكم

6.3 ت

ارتفاع مغلق

200 ملم

محرك

1.1 كيلو واط

ماركة

متشائم

نموذج

ي 23

مهلة

30 يوما

طريقة الدفع او السداد

LC

,

T/T

شرط السعر

EXW

ضمان

سنة واحدة

معلمة آلة التثقيب J23-40T

1. طاولة العمل المائلة 2. قابض المفتاح الصلب المستدير 3. التشغيل السهل والصيانة المنخفضة 4. الهيكل البسيط والضوضاء المنخفض   آلة اللكم الشخصية
غرض وحدة قيمة
القوة الاسمية KN 400
انزلاق السكتة الدماغية مم 100
عدد السكتة الدماغية مرات / دقيقة 50
ارتفاع مغلق مم 380
عمق الحلق مم 250
مسافة العمود مم 320
حجم الجدول مم 420 × 640
حجم الماكينة مم 1400 × 1100 × 2300
محرك كو 3.0
وزن كلغ 2400
14 الناس يشاهدون هذا المنتج الآن!
الوصف

A punching machine is a modern machine for punching and embossing sheet metal.  Compared with traditional machinery, it has higher efficiency, lower technical requirements for the operator. It is an indispensable part of production. A punching machine

HARSLE company manufactures the J23 series, which can be widely used for punching holes, blanking, trimming, bending, and forming. It is helpful in the production of aerospace, electrical appliance, bicycle, mechanical appliance, cups, etc, by using different customized molds. A punching machine

A punching machine

مبدأ عملية الضغط على السلطة

The principle of the machine is to convert the circular motion into a linear motion. Firstly the main motor outputs the force, and drives the flywheel and the gear, then running through the crankshaft, connecting rod, etc to achieve the linear motion of the slider. There is a circular motion from the main motor to the connecting rod. A punching machine

The transition point between circular motion and linear motion is between the connecting rod and the slider. Generally there are two kinds of mechanisms here, one is a ball type and the other is a cylindrical type, which convert to linear motion of the slider. The power press punches the material to deform it and obtain the required shape with high accuracy. Therefore, a set of dies (including upper and bottom die) must be matched to place the material, and the machine force to deform it. A punching machine

آلة التثقيب الميكانيكية J231-2

آلة التثقيب الميكانيكية J231-2

الميزات الرئيسية لـ آلة اللكم الميكانيكية

  1. صلابة عالية نتيجة للهيكل المصبوب الذي يتمتع بمقاومة عالية للاهتزاز
  2. Convenient C-type frame, bigger area for loading and unloading A punching machine
  3. العمود المرفقي سهل الصيانة لضمان كفاءة العمليات
  4. تم تجهيز جهاز سلامة الضغط لأسفل مكبس الطاقة، الحماية للطوارئ
  5. جهاز تغذية مؤازر متوافق وتلقائي لزيادة الإنتاجية

    آلة التثقيب الميكانيكية J231-3

    آلة التثقيب الميكانيكية J231-3

 

مراجعات (1)

مراجعة واحدة لـ A Punching Machine J23-6.3T Hand Punch Press

  1. توني جوثسون -

    جاءت الآلة سليمة ، أنا سعيد جدًا بالبضائع 

    • ويندي -

      شكرا جزيلا لك!
      أتمنى لك عمل مزدهر!

إضافة مراجعة

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *

حول هارسل

لماذا تختار هارسل؟

HARSLE هي شركة محترفة لتصنيع آلات تشغيل المعادن في الصين لسنوات عديدة ، وقد تم بيع إنتاجنا إلى أكثر من 100 دولة في العالم!

المصنع مباشرة

سيقدم HARSLE Factory أفضل الأسعار دون أن يحدث أي وسطاء فرق السعر.

ضمان 3 سنوات

ستقدم HARSLE ضمانًا لمدة 3 سنوات لجميع العملاء بعد استلام الآلات.

خدمة 7 * 24

سيوفر فريق خدمة العملاء HARSLE خدمة عبر الإنترنت 7 * 24 عبر الهاتف أو الإنترنت.