Pneumatic power press machine Metal Plate Punching Holes
5.00개의 고객 평가를 기준으로 5점 만점에 1점으로 평가됨
(1개의 고객 상품평)
무게 | 500 킬로그램 |
---|---|
크기 | 1200 × 1200 × 1200 mm |
전원 |
영적인 |
펀칭 포스 |
100T |
목 깊이 |
330mm |
뇌졸중 |
160mm |
모델 |
JH21 |
상표 |
하슬 |
리드 타임 |
30 일 |
지불 방법 |
LC ,T/T |
가격 기간 |
EXW |
보증 |
1년 |
14
지금 이 상품을 보시는 분들!
설명
Pneumatic power press machine Main features
- 공압 파워 프레스 features fine steel plates welded machine body, tempering treatment (or vibration relief), shot blasting, rigidness, accuracy, and stability. Pneumatic power press machine
- 수직 위치의 크랭크축, 컴팩트한 구조; 크랭크 샤프트는 고주파 담금질 후 연삭 처리를 거치며 마무리가 매끄럽고 유연하게 회전합니다. 가이드 정확도가 높은 청동 판 표면이있는 길어진 직사각형 육각 가이드 웨이.
- Pneumatic dual balance cylinder, balanced sliding block and punch weight, which reduces impact and noise, eliminates the clearance between connecting rod and sliding block, reduce the impact and wear of the stress parts. Pneumatic power press machine
- The whole machine adopts PLC centralized control. The gas circuits adopt imported safety dual valves, which can achieve jog, inch, single and continuous punching. Pneumatic power press machine
- The key parts such as sliding block, guideways, worktable plate, connecting rod, and are all castings made of resin sand, which improved the surface roughness 1-2 level, and improves the size accuracy 2-3 levels. Pneumatic power press machine
- The 60T-level machines adopt the electrical control device to adjust the die height. Fine configuration, the key parts like pneumatic components, electrical components, sealing parts, buttons, etc all adopt imported parts. Pneumatic power press machine
공압 파워 프레스의 원리
영적인 파워 프레스 uses the high-pressure gas generated by the compressor and delivers it to the solenoid valve through the pipeline, controlling the function of the solenoid valve by the footswitch thus controlling the working of the air cylinder to achieve the purpose of punching. The compressed air can be stored in the air tank and used at any time, it can avoid energy waste during the idling time. Using the cylinder as the working part and the solenoid valve as the control element make the machine structure simpler, with low failure rate, high safety, simple maintenance, lower maintenance cost, and high production efficiency. Pneumatic power press machine
공압 프레스 애프터 서비스
1. Warranty period is 12 months after receiving machine; any quick-wear part is available for free during guarantee period under proper operation, customers only need to pay for the freight of the replaced new parts. Pneumatic power press machine
2. Installation and training service is optional for customers, any client can ask for this service from HARSLE, they should assume the airfare and accommodation for our engineer during the journey. Pneumatic power press machine
상품평 (1)
Pneumatic power press machine Metal Plate Punching Holes에 대한 1개 리뷰
상품평 추가하기 응답 취소
카테고리: 공압 프레스
태그: JH21, JH21 공압 펀칭기, 공압 파워 프레스
이브 –
Description of the machine and equipment are accurate. Delivery took 2 months, to my questions where the parcel the seller answered immediately. the machine has checked everything works I’m happy. Seller recommend.
웬디 –
매우 감사합니다!
사업 번창하시길 바랍니다!