Soco photoelectric hand device is important to protect the safety of operating personnel the actual stamping production device, but pay special attention to it after the installation is complete, not once and for all, each class must be checked before using photoelectric protection control of the press is normal, namely in photoelectric hand protection interval (travel between 30 ° to 180 °, return don’t protect the CAM switch in the off state), cover your screen, press the slider should be able to immediately stop; When the slider is at the bottom dead center (180°), cover the light curtain and the punch slider should return automatically.

At the same time, in order to ensure the long-term reliability of the photoelectric armguard for prensa de perfuração, in addition to the maintenance of each shift handover, it must also be regularly checked and maintained, the following details about the maintenance rules:

Special attention: during the use of photoelectric armguard for prensa de soco, avoid the collision of workpiece, tools, waste materials and another photoelectric armguard device. In case of failure, it should stop immediately and be repaired by professional maintenance personnel.

Por favor clique http://www.harsle.com para saber mais sobre punch press!