HARSLE Hole Punch Press Description

A punching machine is a modern machine for punching and embossing sheet metal.  Compared with traditional machinery, it has higher efficiency, lower technical requirements for the operator. It is an indispensable part of production. HARSLE Hole Punch Press

HARSLE company manufactures the J23 series, which can be widely used for punching holes, blanking, trimming, bending, and forming. It is helpful in the production of aerospace, electrical appliance, bicycle, mechanical appliance, cups, etc, by using different customized molds. HARSLE Hole Punch Press

Princip HARSLE Hole Punch Press

The principle of the machine is to convert the circular motion into a linear motion. Firstly the main motor outputs the force, and drives the flywheel and the gear, then runs through the crankshaft, connecting rod, etc to achieve the linear motion of the slider. There is a circular motion from the main motor to the connecting rod. HARSLE Hole Punch Press

The transition point between circular motion and linear motion is between the connecting rod and the slider. Generally, there are two kinds of mechanisms here, one is a ball type and the other is a cylindrical type, which converts to linear motion of the slider. The power press punches the material to deform it and obtain the required shape with high accuracy. Therefore, a set of dies (including upper and bottom die) must be matched to place the material, and the machine is forced to deform it. HARSLE Hole Punch Press

J23 Mechanický děrovací stroj 1-2

Hlavní vlastnosti HARSLE Hole Punch Press

1. Vysoká tuhost díky lité konstrukci, která má vyšší odolnost proti vibracím
2. Pohodlný rám typu C, větší plocha pro nakládání a vykládání
3. Klikový hřídel se snadnou údržbou pro zajištění efektivity operací
4. Stlačovací pojistka vybavená v power press, ochrana pro případ nouze
5. Kompatibilní a automatické servo podávací zařízení pro maximalizaci produktivity
   

   J23 Mechanický děrovací stroj1-3