JW36 pneumatic power punch Metal Hole Power Punch Press

JW36 pneumatic power punch Main Features of 공압 펀칭기

The pneumatic punching machine features fine steel plates welded machine body, tempering treatment (or vibration relief), shot blasting, rigidness, accuracy, and stability. JW36 pneumatic power punch
Vertical located crankshaft, compact structure; the crankshaft undergoes grinding treatment after high-frequency quenching, which has a good smooth finish and rotates flexibly; lengthened rectangle hex guideway with a surface of bronze plate, which has high guide accuracy. JW36 pneumatic power punch
Pneumatic dual balance cylinder, balanced sliding block and punch weight, reduces impact and noise, eliminates the clearance between connecting rod and sliding block, and reduces the impact and wear of the stress parts. JW36 pneumatic power punch
The whole machine adopts PLC centralized control. The gas circuits adopt imported safety dual valves, which can achieve jog, inch, single and continuous punching. JW36 pneumatic power punch
슬라이딩 블록, 가이드웨이, 작업대, 커넥팅 로드 등의 주요 부품은 모두 수지 모래로 만든 주물로 표면 조도를 1~2단계 개선하고 치수 정확도를 2~3단계 개선했습니다.
60T 레벨 기계는 전기 제어 장치를 채택하여 다이 높이를 조정합니다. 미세 구성, 공압 부품, 전기 부품, 씰링 부품, 버튼 등과 같은 주요 부품은 모두 수입 부품을 채택합니다.

JH25 시리즈의 원리 공압 파워 프레스

A pneumatic punching machine uses the high-pressure gas generated by the compressor and delivers it to the solenoid valve through the pipeline, controlling the function of the solenoid valve by the footswitch thus controlling the working of the air cylinder to achieve the purpose of punching. The compressed air can be stored in the air tank and used at any time, it can avoid energy waste during the idling time. Using the cylinder as the working part and the solenoid valve as the control element make the machine structure simpler, with a low failure rate, high safety, simple maintenance, lower maintenance cost, and high production efficiency. JW36 pneumatic power punch

애프터 서비스 공압 파워 프레스

1. 보증 기간은 기계를 받은 후 12개월입니다. 빠른 마모 부품은 적절한 작동 하에서 보증 기간 동안 무료로 제공되며, 고객은 교체된 새 부품의 운임을 지불하기만 하면 됩니다.
2. Installation and training service is optional for customers, any client can ask for this service from HARSLE, and they should assume the airfare and accommodation for our engineer during the journey. JW36 pneumatic power punch