25-ton hole punching machine Die C Type Sheet Pneumatic
| 무게 | 500 킬로그램 |
|---|---|
| 크기 | 1200 × 1200 × 1200 mm |
| 전원 |
영적인 |
| 펀칭 포스 |
25T |
| 테이블 크기 |
720mm*400mm |
| 스트로크 조정 |
아니요 |
| 모델 |
JH21 |
| 상표 |
하슬 |
| 리드 타임 |
30 일 |
| 지불 방법 |
LC ,T/T |
| 가격 기간 |
EXW |
| 보증 |
1년 |
19
지금 이 상품을 보시는 분들!
설명
25-ton hole punching machine Main features
- 공압 파워 프레스 features fine steel plates welded machine body, tempering treatment (or vibration relief), shot blasting, rigidness, accuracy, and stability. 25-ton hole punching machine
- 수직 위치의 크랭크축, 컴팩트한 구조; 크랭크 샤프트는 고주파 담금질 후 연삭 처리를 거치며 마무리가 매끄럽고 유연하게 회전합니다. 가이드 정확도가 높은 청동 판 표면이있는 길어진 직사각형 육각 가이드 웨이.
- Pneumatic dual balance cylinder, balanced sliding block and punch weight, which reduces impact and noise, eliminate the clearance between connecting rod and sliding block, reduce the impact and wear of the stress parts. 25-ton hole punching machine
- The whole machine adopts PLC centralized control. The gas circuits adopt imported safety dual valves, which can achieve jog, inch, single and continuous punching. 25-ton hole punching machine
- 슬라이딩 블록, 가이드웨이, 작업대, 커넥팅 로드 등의 주요 부품은 모두 수지 모래로 만든 주물로 표면 조도를 1~2단계 개선하고 치수 정확도를 2~3단계 향상시켰다.
- The 60T-level machines adopt the electrical control device to adjust the die height. Fine configuration, the key parts like pneumatic components, electrical components, sealing parts, buttons, etc all adopt imported parts. 25-ton hole punching machine
CNC 펀칭기의 원리
영적인 파워 프레스 uses the high-pressure gas generated by the compressor and delivers it to the solenoid valve through the pipeline, controlling the function of the solenoid valve by the footswitch thus controlling the working of the air cylinder to achieve the purpose of punching. The compressed air can be stored in the air tank and used at any time, it can avoid energy waste during the idling time. Using the cylinder as the working part and the solenoid valve as the control element make the machine structure simpler, with low failure rate, high safety, simple maintenance, lower maintenance cost, and high production efficiency. 25-ton hole punching machine
CNC 펀칭기 판매 후 서비스
1. Warranty period is 12 months after receiving machine; any quick-wear part is available for free during guarantee period under proper operation, customers only need to pay for the freight of the replaced new parts. 25-ton hole punching machine
2. Installation and training service is optional for customers, any client can ask for this service from HARSLE, they should assume the airfare and accommodation for our engineer during the journey. 25-ton hole punching machine
상품평 (0)
상품평
아직 상품평이 없습니다.