Pneumatic cnc punching Punching machine
5.00개의 고객 평가를 기준으로 5점 만점에 1점으로 평가됨
(1개의 고객 상품평)
무게 | 500 킬로그램 |
---|---|
크기 | 1200 × 1200 × 1200 mm |
전원 |
영적인 |
펀칭 포스 |
200T |
테이블 크기 |
1390mm*840mm |
스트로크 조정 |
아니요 |
모델 |
JH21 |
상표 |
하슬 |
리드 타임 |
30 일 |
지불 방법 |
LC ,T/T |
가격 기간 |
EXW |
보증 |
1년 |
14
지금 이 상품을 보시는 분들!
설명
공압 펀치 머신의 주요 기능
- 공압 펀치 머신 features fine steel plates welded machine body, tempering treatment (or vibration relief), shot blasting, rigidness, accuracy, and stability. pneumatic cnc punching
- 수직 위치의 크랭크축, 컴팩트한 구조; 크랭크 샤프트는 고주파 담금질 후 연삭 처리를 거치며 마무리가 매끄럽고 유연하게 회전합니다. 가이드 정확도가 높은 청동 판 표면이있는 길어진 직사각형 육각 가이드 웨이.
- 공압 이중 균형 실린더, 균형 잡힌 슬라이딩 블록 및 펀치 중량은 충격과 소음을 줄이고 커넥팅 로드와 슬라이딩 블록 사이의 간극을 제거하고 응력 부품의 충격과 마모를 줄입니다.
- The whole machine adopts PLC centralized control. The gas circuits adopt imported safety dual valves, which can achieve jog, inch, single and continuous punching. pneumatic cnc punching
- The key parts such as sliding block, guideways, worktable plate, connecting rod, and are all castings made of resin sand, which improved the surface roughness 1-2 level, and improves the size accuracy 2-3 levels. pneumatic cnc punching
- 60T 레벨 기계는 전기 제어 장치를 채택하여 다이 높이를 조정합니다. 미세 구성, 공압 부품, 전기 부품, 씰링 부품, 버튼 등과 같은 주요 부품은 모두 수입 부품을 채택합니다.
공압 파워 프레스의 원리
영적인 펀치 머신 uses the high-pressure gas generated by the compressor and delivers it to the solenoid valve through the pipeline, controlling the function of the solenoid valve by the footswitch thus controlling the working of the air cylinder to achieve the purpose of punching. The compressed air can be stored in the air tank and used at any time, it can avoid energy waste during the idling time. Using the cylinder as the working part and the solenoid valve as the control element make the machine structure simpler, with low failure rate, high safety, simple maintenance, lower maintenance cost, and high production efficiency. pneumatic cnc punching
공압 펀치 기계 애프터 서비스
1. 보증 기간은 기계를 받은 후 12개월입니다. 빠른 마모 부품은 정상적인 작동 상태에서 보증 기간 동안 무료로 제공되며 고객은 교체된 새 부품의 운임을 지불하면 됩니다.
2. Installation and training service is optional for customers, any client can ask for this service from HARSLE, they should assume the airfare and accommodation for our engineer during the journey. pneumatic cnc punching
상품평 (1)
Pneumatic cnc punching Punching machine에 대한 1개 리뷰
상품평 추가하기 응답 취소
David –
Good CNC punching machine and good company to deal with! I like HARSLE!
웬디 –
매우 감사합니다!
사업 번창하시길 바랍니다!