JH25 Punching Machine Power Press Small Metal Punch

JH25 Punching Machine Main Features of 공압 펀칭기

JH25-더블 포인트 공압 펀칭기

The pneumatic punching machine features fine steel plates welded machine body, tempering treatment (or vibration relief), shot blasting, rigidness, accuracy, and stability. JH25 Punching Machine
Vertical located crankshaft, compact structure; the crankshaft undergoes grinding treatment after high-frequency quenching, which has a good smooth finish and rotates flexibly; lengthened rectangle hex guideway with a surface of bronze plate, which has high guide accuracy. JH25 Punching Machine
Pneumatic dual balance cylinder, balanced sliding block and punch weight, reduces impact and noise, eliminates the clearance between connecting rod and sliding block, and reduces the impact and wear of the stress parts. JH25 Punching Machine
The whole machine adopts PLC centralized control. The gas circuits adopt imported safety dual valves, which can achieve jog, inch, single and continuous punching. JH25 Punching Machine
슬라이딩 블록, 가이드웨이, 작업대, 커넥팅 로드 등의 주요 부품은 모두 수지 모래로 만든 주물로 표면 조도를 1~2단계 개선하고 치수 정확도를 2~3단계 개선했습니다.
The 60T-level machines adopt the electrical control device to adjust the die height. Fine configuration, the key parts like pneumatic components, electrical components, sealing parts, buttons, etc all adopt imported parts. JH25 Punching Machine

JH25 시리즈의 원리 공압 파워 프레스

A pneumatic punching machine uses the high-pressure gas generated by the compressor and delivers it to the solenoid valve through the pipeline, controlling the function of the solenoid valve by the footswitch thus controlling the working of the air cylinder to achieve the purpose of punching. The compressed air can be stored in the air tank and used at any time, it can avoid energy waste during the idling time. Using the cylinder as the working part and the solenoid valve as the control element make the machine structure simpler, with a low failure rate, high safety, simple maintenance, lower maintenance cost, and high production efficiency. JH25 Punching Machine

애프터 서비스 공압 파워 프레스

1. 보증 기간은 기계를 받은 후 12개월입니다. 빠른 마모 부품은 적절한 작동 하에서 보증 기간 동안 무료로 제공되며, 고객은 교체된 새 부품의 운임을 지불하기만 하면 됩니다.
2. 설치 및 교육 서비스는 고객에게 선택 사항이며 모든 고객이 HARSLE에 이 서비스를 요청할 수 있으며 여행 중 엔지니어의 항공료 및 숙박 시설을 부담해야 합니다.