j23-63t power press A power press is a modern machine for punching and embossing sheet metal.  Compared with traditional machinery, it has higher efficiency, lower technical requirements for the operator. It is an indispensable part of the production. j23-63t power press

Компания HARSLE производит J23 серии, which can be widely used for punching holes, blanking, trimming, bending, and forming. In the production of aerospace, electrical appliance, bicycle, mechanical appliance, cups, etc. by using different customized molds. j23-63t power press

j23-63t power press Principle of power press

Принцип перфоратор is to convert the circular motion into a linear motion. Firstly the main motor outputs the force, and drives the flywheel and the gear, then running through the crankshaft, connecting rod, etc to achieve the linear motion of the slider. There is a circular motion from the main motor to the connecting rod. j23-63t power press

The transition point between circular motion and linear motion is between the connecting rod and the slider. Generally, there are two kinds of mechanisms here, one is a ball type and the other is a cylindrical type, which converts to linear motion of the slider. The power press punches the material to deform it and obtain the required shape with high accuracy. Therefore, a set of dies (including upper and bottom die) must be matched to place the material, and the machine force to deform it. j23-63t power press

Основные особенности

1. Высокая жесткость за счет литой конструкции, которая имеет более высокую вибростойкость
2. Удобная С-образная рама, большая площадь для погрузки и разгрузки
3. Коленчатый вал, не требующий особого ухода, для обеспечения эффективности работы
4. Устройство безопасности при нажатии, защита на случай аварии
5. Совместимое автоматическое сервоподводящее устройство для максимальной производительности
6. Индивидуальные параметры для разнообразных продуктов
   

   J23 Механический пробивной станок 1-3