j23-63t power press Punching Press China Factory

무게 500 킬로그램
크기 1200 × 1200 × 1200 mm
전원

전기 같은

펀칭 포스

63T

뇌졸중

100mm

스트로크 조정

아니요

상표

하슬

모델

J23

리드 타임

30 일

지불 방법

LC

,

T/T

가격 기간

EXW

보증

1년

J23-40T 펀칭기 매개변수

1. 경사진 작업대 2. 강성 회전 키 클러치 3. 쉬운 작동 및 낮은 유지 보수 4. 간단한 구조 및 저소음   펀칭기 프로필
안건 단위
공칭 힘 KN 400
슬라이드 스트로크 mm 100
스트로크 수 시간/분 50
닫힌 높이 mm 380
목 깊이 mm 250
열 거리 mm 320
테이블 크기 mm 420x640
기계 크기 mm 1400 x 1100 x 2300
모터 3.0
무게 킬로그램 2400
19 지금 이 상품을 보시는 분들!
설명

j23-63t power press A power press is a modern machine for punching and embossing sheet metal.  Compared with traditional machinery, it has higher efficiency, lower technical requirements for the operator. It is an indispensable part of the production. j23-63t power press

HARSLE 회사는 J23 시리즈, which can be widely used for punching holes, blanking, trimming, bending, and forming. In the production of aerospace, electrical appliance, bicycle, mechanical appliance, cups, etc. by using different customized molds. j23-63t power press

j23-63t power press

j23-63t power press Principle of power press

원리 펀칭기 is to convert the circular motion into a linear motion. Firstly the main motor outputs the force, and drives the flywheel and the gear, then running through the crankshaft, connecting rod, etc to achieve the linear motion of the slider. There is a circular motion from the main motor to the connecting rod. j23-63t power press

The transition point between circular motion and linear motion is between the connecting rod and the slider. Generally, there are two kinds of mechanisms here, one is a ball type and the other is a cylindrical type, which converts to linear motion of the slider. The power press punches the material to deform it and obtain the required shape with high accuracy. Therefore, a set of dies (including upper and bottom die) must be matched to place the material, and the machine force to deform it. j23-63t power press

j23-63t power press

주요 특징

  1. 높은 내진동성을 갖는 주조 구조로 인한 높은 강성
  2. 편리한 C형 프레임, 더 넓은 적재 및 하역 공간
  3. 작업의 효율성을 보장하는 유지 보수가 쉬운 크랭크 샤프트
  4. 누름 안전 장치, 비상용 보호
  5. 생산성 극대화를 위한 호환 가능한 자동 서보 피딩 장치
  6. 다양한 제품을 충족시키는 맞춤형 매개변수

    J23 기계 펀칭기1-3

    J23 기계 펀칭기1-3

상품평 (0)

상품평

아직 상품평이 없습니다.

“j23-63t power press Punching Press China Factory”의 첫 상품평을 남겨주세요

이메일 주소는 공개되지 않습니다. 필수 항목은 *(으)로 표시합니다

HARSLE 소개

HARSLE을 선택하는 이유는 무엇입니까?

HARSLE은 수년 동안 중국의 전문 금속 가공 기계 제조업체이며 우리 제품은 전 세계 100개국 이상에 판매되었습니다!

공장 직접

HARSLE Factory는 어떠한 중개인도 가격 차이를 만들지 않고 최고의 가격을 제공할 것입니다.

3년 보증

HARSLE은 기계를 받은 후 모든 고객에게 3년 보증을 제공합니다.

7*24 서비스

HARSLE 고객 서비스 팀은 전화 또는 인터넷을 통해 7*24 온라인 서비스를 제공합니다.