Pneumatic power press machine Main features

1. นิวเมติก กดเพาเวอร์ features fine steel plates welded machine body, tempering treatment (or vibration relief), shot blasting, rigidness, accuracy, and stability. Pneumatic power press machine
2. เพลาข้อเหวี่ยงแนวตั้ง โครงสร้างกะทัดรัด เพลาข้อเหวี่ยงผ่านการเจียรหลังจากการดับด้วยความถี่สูงซึ่งมีผิวเรียบที่ดีและหมุนได้อย่างคล่องตัว รางนำฐานสิบหกทรงสี่เหลี่ยมผืนผ้ายาวที่มีพื้นผิวเป็นแผ่นสีบรอนซ์ซึ่งมีความแม่นยำในการนำสูง
3. Pneumatic dual balance cylinder, balanced sliding block and punch weight, which reduces impact and noise, eliminates the clearance between connecting rod and sliding block, reduce the impact and wear of the stress parts. Pneumatic power press machine
4. The whole machine adopts PLC centralized control. The gas circuits adopt imported safety dual valves, which can achieve jog, inch, single and continuous punching. Pneumatic power press machine
5. The key parts such as sliding block, guideways, worktable plate, connecting rod, and are all castings made of resin sand, which improved the surface roughness 1-2 level, and improves the size accuracy 2-3 levels. Pneumatic power press machine
6. The 60T-level machines adopt the electrical control device to adjust the die height. Fine configuration, the key parts like pneumatic components, electrical components, sealing parts, buttons, etc all adopt imported parts. Pneumatic power press machine

หลักการกดแรงดันลม

นิวเมติก กดเพาเวอร์ uses the high-pressure gas generated by the compressor and delivers it to the solenoid valve through the pipeline, controlling the function of the solenoid valve by the footswitch thus controlling the working of the air cylinder to achieve the purpose of punching. The compressed air can be stored in the air tank and used at any time, it can avoid energy waste during the idling time. Using the cylinder as the working part and the solenoid valve as the control element make the machine structure simpler, with low failure rate, high safety, simple maintenance, lower maintenance cost, and high production efficiency. Pneumatic power press machine

บริการหลังการขาย เครื่องอัดลม

1. Warranty period is 12 months after receiving machine; any quick-wear part is available for free during guarantee period under proper operation, customers only need to pay for the freight of the replaced new parts. Pneumatic power press machine
2. Installation and training service is optional for customers, any client can ask for this service from HARSLE, they should assume the airfare and accommodation for our engineer during the journey. Pneumatic power press machine