Things You Need to Know about Deep Throat Punch

With the improvement of market demands, deep throat punch is more and more welcomed by processing manufacturers. Today HARSLE will give you a detailed introduction of what deep throat punch is. I hope this article will be helpful for you to understand deep throat punch.

People also call Deep throat punch as deep neck punch. Throat depth refers to the distance from the center of the die handle hole to the back-wall panel. Generally speaking, there are 420 mm, 500 mm, 800 mm, and 1250 mm for the larger numbers. Specifically, buyers need to choose the throat depth according to the actual production needs.

Deep throat punch is a type of punch press. Factories use them for sheet punching, such as large electrical cabinets, cat’s eye of the anti-theft doors. The deep hole distance is usually more than 300 mm, while the ordinary punch throat is only about 180-230. When operator puts the plate into the punch, the plate will against the wall plate. So it cannot achieve the distance between the hole and the plate edge, which requires the use of deep throat punch.

With continuous innovation of technology, many manufacturers want to improve production efficiency, especially in the deep throat punch with numerical control system, to a large extent play the effect of numerical control. People use the high efficiency deep throat punch in aircraft, luxury passenger cars, high-speed EMU muffler plate and heat plate punching.

For deep throat presses, there are many different tonnages to different throat depth, such as 10 tons, 16 tons, 25 tons, 40 tons, 63 tons, 80 tons, 100 tons, 125 tons, 160 tons and so on.

The above is the introduction of HARSLE on the deep throat punch, I hope it is helpful to you. HARSLE is professional in machines for more than 20 years, and we export the machines to 110 countries and regions. Please visit www.harsle.com for more information on the machines!