CNC punch pneumatic system maintenance and spot check

Pneumatic equipment is an important part of CNC punch press. Pneumatic system operation consists of pressure, flow and flow direction. Because of pneumatic equipment air easy to obtain, and simple structure, gas source for the environment pollution-free, operation speed, high operating frequency, so obtained widespread use on the CNC punch press, commonly used to frequent starting auxiliary work done. Part of the small CNC punch through the gas-liquid transfer equipment to achieve manipulator action and spindle release.

There are three main reasons for pneumatic failure: firstly, the design of pneumatic equipment is unreasonable or incomplete; Secondly, the installation operation is wrong, leading to components, components run abnormal; Thirdly, usage and maintenance is not perfect. Operators must modify and improve design faults after full analysis and study. They can solve the latter two faults by repairing, adjusting and perfecting daily maintenance and spot inspection.

Let’s learn about the maintenance and spot check of pneumatic equipment. Spot inspection of piping facilities usually refers to the management of condensate water and lubricating oil. The operators must ensure discharge of condensate water normally before pneumatic equipment operation. However, when the ambient temperature is lower than 0℃ in the evening, in order to avoid condensation water freezing, after the completion of pneumatic equipment, the operators need to open the discharge valve to discharge condensed water. When adding lubricating oil, it is necessary to check whether the quality of oil in the lubricator and the amount of oil drop meet the standard. In addition, the operators should carry out the daily point inspection to check the air supply pressure and leakage phenomenon.

Regular inspection of pneumatic components is mainly to completely solve the air leakage phenomenon of the system. For example, replace sealing elements, repair pipe joints or check whether connection screws are loose, and regularly check measuring instruments, pressure relays and safety valves, etc.

Now we have known a lot about pneumatic punch press system maintenance and spot check, we will use the punching press better in our work in the future. Please click http://www.harsle.com to know more about machines and https://www.harsle.com/Punching-Machine.html to know more about punching machine!