The maintenance of the punching machine in winter is nothing more than anti-rust and anti-aging. In particular, the equipment environment of some hydraulic forming machines that work outdoors is very harsh, because the work objects are generally metal products such as iron plates, so they are also very simple to wear and tear, coupled with the cold weather, the air becomes humid, making the press equipment especially suitable for press and easy to rust.

  The rusts of the Нажмите will affect work efficiency and reduce the output value. At the same time, it will stop production and even needs to pay for repairs. Firstly, the simplest and most effective way to avoid the rust of the machine is to change the anti-oxidation paint, apply mineral oil, paint, or burn enamel or spray on the surface of the iron products. Use electroplating or hot-dip plating to coat the surface of steel with a layer of metal that is not easy to rust, such as zinc, tin, chromium, nickel, etc. These metals can form a fine oxide film on the surface, and then prevent iron products from contacting with water, air and other substances to rust. Besides, if there is paint falling off on the metal surface of the punching machine, the anti-oxidation paint should be modified in time.

In some northern cold areas, because the temperature is low in winter, the punching machine is in a state of discontinuation, so it should also be stored in a dry and well-ventilated environment when it is shut down. It is best to store the parts and other parts to apply lubricating oil. Because the smooth parts of some прессовое оборудование are affected by temperature, the lubricating oil is very simple to condense. Therefore, it is necessary to choose a suitable low-temperature-resistant lubricating oil, preferably a lubricating oil series with a low condensation point, based on thermal expansion and the principle of shrinkage, so the gap between the moving parts tends to shrink with the decrease of temperature, which can ensure that the parts are more wear-resistant at low temperatures. The oil tank of the current punching machine has a small volume, and the amount of lubricating oil that can be contained in it is relatively small. If the oil temperature is too high in the punch operation, the lubricating oil needs to have better oxidation resistance and thermal stability. The maintenance of the press is very necessary, especially in winter, when the temperature is too low, the mechanical equipment may be relatively weak, and you should pay attention to it during normal use to avoid unnecessary damage.