12 points sur les matrices d'estampage automobile

Temps de lecture estimé : 5 minutes
Dans le processus de conception et de production d'automobiles estampillage dies, not only must practically meet the technical requirements of body parts, but also attach great importance to the mechanical equipment,
operation methods, transportation methods, and mold installations used in the design and manufacturing process. and waste disposal issues. Automobile Stamping Dies
1. Factors Considered in Estampillage Die Automobile Stamping Dies
- Prix
In the process of designing and manufacturing automotive stamping dies, the first factor to consider is its price, which will affect the final sales of the product. Automobile Stamping Dies
- Qualité
The level of automobile safety factor is usually determined by stamping dies, therefore, the quality of stamping dies will also directly affect product sales. Automobile Stamping Dies
- Humanisation
Dans le processus de conception de matrices d'emboutissage automobile, l'humanisation est également un facteur important à prendre en compte, et une attention particulière doit être portée à son entretien et à sa réparation afin que la remplaçabilité partielle de la matrice puisse être reflétée plus fortement. Pour les pièces dont la fréquence de remplacement est relativement élevée, des normes plus élevées doivent être définies dans le processus de conception, ce qui est extrêmement bénéfique tant pour l'approvisionnement que pour l'achat.
- Matières premières
Généralement en acier allié ou en alliage de fonte.
- Précision
In mold production, precision will directly affect the degree of fit between parts after assembly, as well as the presentation of gap consistency. Automobile Stamping Dies
2. Maintenance et réparation de matrices d'emboutissage automobile
Due to the harsh working environment of automotive stamping dies, during use, the working parts, fitting parts, and sliding positions are often worn or even damaged. At the same time, due to factors such as complex mold design and manufacturing process, high precision, long cycle time, and high cost, it is necessary to repair problems in time during use, so as to ensure accuracy and improve service life. Although the maintenance and repair of automobile stamping dies are very complicated, there are mainly the following seven situations for frequent failures and maintenance methods: Automobile Stamping Dies
- Flanging Deformed Automobile Stamping Dies
In the process of flanging and shaping, the deformation of the workpiece often occurs, especially the deformation in the surface part, which has a great impact on the quality of the workpiece.
The general solution is to increase the pressing force. If it is a spring-pressing material, the method of adding a spring can be used. For the upper air cushion pressing material, the method of increasing the air cushion force is usually used;
if there is still local deformation after increasing the pressure, it is necessary to Find out the specific problems, check whether there is a local depression on the binder surface, etc. At this time, the method of welding and repairing the binder can be used; after the binder is welded, it will be researched and matched with the lower surface of the mold.
- Écaillage des bords Automobile Stamping Dies
C'est l'un des problèmes les plus courants qui surviennent lors de l'utilisation de moules. Si l'écaillage du tranchant du couteau est très petit, il est généralement nécessaire de meuler le bord d'écaillage plus grand avec une meuleuse et de le souder avec la baguette de soudage correspondante pour s'assurer que la soudure est ferme et qu'il n'est pas facile d'ébrécher à nouveau.
- Brossage
Il se produit principalement dans des processus tels que l'étirage, le formage et le bridage. Pour comparer la pièce afin de trouver la position de rugosité correspondante du moule, poussez-la doucement avec une pierre à huile, faites attention à la taille uniforme des coins arrondis, puis polissez-la avec du papier de verre fin.
- Couper et poinçonner le ruban Automobile Stamping Dies
Due to the abnormality of the pressing or unloading device of the mold during trimming or punching, the trimming and punching carry material. At this time, it is also necessary to find the corresponding part of the mold according to the position of the part.
If there is any abnormality in the mold pressing stripper, repair the welding of the pressing plate. If there is no problem with the mold-pressing stripping plate, you can check the mold knife block Whether there is a hair-pulling phenomenon.
- Déchets continus
Parce que l'opérateur n'a pas nettoyé les déchets à temps pendant le processus de production, l'accumulation de déchets a été causée et finalement, le couteau à déchets s'est cassé sous la pression du bloc de couteaux de coupe supérieur, ce qui a entraîné une coupe continue des déchets. La méthode de sa réparation est similaire à celle de la coupe des bords et de l'écaillage.
- Problème
Due to the gap between the cutting edges of the mold, the burr is too large when the workpiece is trimmed, punched, and blanked. When the gap is large, the trimming and punching process adopts the method of trimming the die without moving the punch, and in the blanking process, the method of trimming the die without changing the die is used.
If the gap is small, it should be adjusted according to the size of the mold gap to ensure a reasonable gap. For the trimming, and punching die, the method of placing the gap in the die is adopted, while for the blanking die, the method of enlarging the punch should be adopted, so as to ensure that the size of the part remains unchanged before and after repair.
- Déchets de poinçonnage obstrués
Les déchets de poinçonnage sont bloqués en raison du chemin des déchets non lisse, de la conicité inverse du chemin des déchets et du fait que les déchets ne sont pas nettoyés à temps. Pour s'assurer que les deux côtés A et B sont dans un état lisse et de diamètre égal, il est possible de s'assurer que les déchets ne seront pas bloqués.
Automobile stamping dies, also known as automotive stamping dies or metal stamping dies, are specialized tools used in the manufacturing of automotive parts and components. These dies are an essential part of the metal stamping process, which is widely used in the automotive industry to produce various sheet metal parts and components, such as body panels, chassis parts, brackets, and more.
Here are some key aspects and information about automobile stamping dies:
Purpose:
Automobile stamping dies are used to cut and shape flat sheets of metal (usually steel or aluminum) into specific forms and profiles required for automotive components.
Types of Dies:
Progressive Dies: These are complex dies used to create parts with multiple features and operations. As the metal strip moves through the die, it undergoes various stages, including cutting, bending, and forming, resulting in a finished part.
Transfer Dies: Transfer dies are used when a part requires multiple stamping operations, but instead of progressing along a single strip, the part is transferred from one station to another using mechanical or hydraulic mechanisms.
Single-Station Dies: These dies are used for simple stamping operations, where a single operation, such as cutting or forming, is performed at a single station.
Très utile!
Je prévois d'acheter une poinçonneuse, avez-vous aussi les moules ?
Oui, nous avons les moules.
Pourriez-vous s'il vous plaît m'envoyer votre adresse mail?
Je peux citer pour vous bientôt!